Omega2 Dash
$69.00
OM-O2DASH
The Omega2 Dash is a Wi-Fi-enabled Linux computer with a built-in touchscreen. It is a stand-alone, all-in-one solution that provides a touch-based visual UI that can be internet-connected, connected to other devices, or both. It can display the commandline, run programs that create a touch-based UI, and display images.
Description
The Omega2 Dash is a Wi-Fi-enabled Linux computer with a built-in touchscreen. It is a stand-alone, all-in-one solution that provides a touch-based visual UI that can be internet-connected, connected to other devices, or both. It can display the commandline, run programs that create a touch-based UI, and display images.
It is a self-contained device with Linux OS preloaded on its on-board flash storage. Just add power over Micro USB and it will boot in less than a minute. Omega2 Dash works right out of the box, so it can be dropped easily into a project. Plus, no additional storage is required.
We’re building Omega2 Dash within the larger Onion ecosystem. The popular Omega2S module is the computing and communications unit of Omega2 Dash – it runs Linux OS, manages the Wi-Fi radio, and controls the touchscreen.
See the Omega2 Dash Guide for details on getting started and using your Omega2 Dash to build your own graphical user interface projects!
- 3.2″ TFT touchscreen display
- 320×240 resolution
- 16-bit (RGB565) color support
- 12-bit resistive touch input
- Rated at minimum MTBF value of 50,000 hours with normal operation
- Based on the Omega2S+ IoT computer module
- Processor: 580 MHz MIPS CPU
- Memory: 128 MB RAM
- Storage: 32 MB
- Connectivity: 2.4 GHz b/g/n Wi-Fi (access point & client)
- Operating System: OpenWrt 18.06 Linux
- I/O
- Expansion Header
- I²C, UART, PWM, Ethernet, GPIOs
- Compatible with existing ecosystem of Omega2 Expansions
- USB 2.0 host
- MicroSD card slot
- Expansion Header
- Antenna
- 2 dBi directional chip antenna
- U.FL connector for external antenna
- USB-to-serial interface on Micro USB port
- Provides reliable, always-on access to the Omega’s commandline
- Status LEDS
- System LED: Indicates whether Linux OS has booted
- Off – Device not powered on
- Blinking – Booting/updating
- On – Up and running
- WiFi LED: Indicates connection to a Wi-Fi network
- Off – Not connected to a Wi-Fi network
- Blinking – Connecting
- On – Connected
- System LED: Indicates whether Linux OS has booted
- Weight: 60 g
- Dimensions: 82 mm x 70 mm
| A. 30-pin Expansion Header | E. Chip antenna |
| B. MicroSD card slot | F. On/off switch |
| C. Reset button | G. Micro USB port |
| D. Omega2S+ IoT module | H. USB 2.0 host port |
| I. 3.2″ TFT touchscreen | K. Amber System Status LED |
| J. Holes for easy mounting | L. Blue Wi-Fi Status LED |
Additional information
| Weight | 0.02 kg |
|---|---|
| Weight | 0.2 g |
| CPU | 580MHz MIPS |
| Memory | 128MB RAM & 384 MB Swap File |
| Storage | 8 GB eMMC |
| USB | 2.0 |
| GPIO | 8 |
| PWM | 2 |
| UART | 2 |
| I2C | 1 |
| SPI | 1 |
| I2S | 1 |
You must be logged in to post a review.
Reviews
There are no reviews yet.