The Omega2 Eval Boards are Wi-Fi enabled Single Board Linux computers meant for getting quickly up and running with the Omega2 family of modules quickly.

With nearly all of the Omega’s capabilities and I/O accessible—including USB Type-C for power and serial access, on-board WiFi, Ethernet, USB Type-A host, a MicroSD slot, and I/O pins—the Eval Boards offer a ready-to-use platform for developing and prototyping your Omega2 projects and products.

Jumpstart Your Omega Project

Omega2 Eval Boards simplify your entry into the Omega ecosystem by providing a compact, plug-and-play platform with full access to essential features—supporting you from initial prototyping to deployment

• Quick onboarding: Go from unboxing to hello world in 5 minutes with our quickstart guide.
• Development & Testing: Easily test your code on hardware and iterate rapidly.
• Prototyping: Effortlessly connect external hardware using acccessible I/O interfaces, and rapidly develop your firmware with our intuitive, well-documented tools that compile faster than ever.
• Deployment-ready: Suitable as a standalone SBC for applications, with ports along one edge and mounting holes for enclosures.
• Design Your Own Boards: Use our open-source design to develop your own Omega2-compatible boards with ease and confidence.

Key Features

• Network Connectivity: Dual Wi-Fi modes (AP & client) and Ethernet support.
• Built-in Ethernet port: ensures reliable networking.
• Reliable Command Line Access: USB-to-serial chip ensures always-on access to Omega’s command line availability, which is invaluable for debugging.
• Flexible I/O: Full Omega2/Omega2S I/O available, 30 pin header compatible with all Omega2 expansions.
• USB Type-A Host: Supports peripheral devices.

Specifications

• Processor: 580 MHz MIPS CPU
• Memory: 128 MB RAM
• Storage: 32 MB
• WiFi: 2.4 GHz b/g/n (AP & client modes available simultaneously)
• OS: OpenWRT 23.05 Linux
• USB-C: Power and serial access to Omega’s command line
• 30-Pin Expansion Header: Provides easy access to the I/Os — including I²C, UART, PWM, and GPIO pins — for easy hardware integration
• Additional I/O: USB 2.0 Type-A Host, MicroSD slot, and Ethernet RJ45 port
• Status LEDs: Boot (amber) and user-programmable (blue)
• WiFi antenna: with 2 dBi directional chip antenna and U.FL connector for external antenna
• Omega2 Eval Board specific
  • New 8-pin expansion header that exposes additional GPIOs and soft-reset pin
• Omega2S Eval Board specific
  • SMT Omega2S+ IoT computer included rather than the through-hole Omega2+
  • New 24-pin expansion header that exposes additional GPIOs, UART, and more